Ground: (automatically adapt to the ground)
This setting is similar with SAT (Self
Adjusting Threshold), the advanced pulse detector, which has the
potential improvements over the standard, more like a feature Tracking,
GPX minelab series devices operate. This setting is very important
during long searches, makes it a simple metal detector is with respect
to many projects, and the operator when the search is much easier,
because it eliminates the need to balance succession, so that if Explore
the sudden change does not happen, or the device itself be hours,
unlike most circuits, the metal detector will still remain in the set up
mode. Enable this setting also makes the device itself permanently, by
changing weather conditions, which affect the stability of the circuit
is synchronized, and always with the same sensibility that set, he
expected to Metal Detecting offer. OFF value means that this feature is
disabled, and then repeated the need for balance in the exploration,
there will be, instead, be a little more sensitive offers. This feature
is enabled other values means. Lower numbers, symbols automatically
adapt faster and higher levels, adapting means slower and longer.
Set
value, depending on the speed of the search operation and to some
extent, a big loop and excavated soil type, and always obtain the best
value in terms of experience. For example, land that a variety of
conditions and bad, lower is better, but slightly less range will be
Metal Detecting, and to better land, more Ground numbers is better, and
will also lead to an increased range. It should be noted, in the case of
sudden changes in exploration, it may be necessary, balance button is
pressed. It should also be noted that if this option is enabled, the
range test metals in the air, a little different. Because this is the
ability to implement a gradual and automatic detector. Near the metal,
slowly and from a distance the loop, there is no accurate way may seem a
range of metal detectors, slightly less regularly, although appropriate
measures have been considered for this case, but for a maximum of
sense, the boundary between the sense and antisense is not metal, not
working, and therefore the final range with this test does not measure
correctly. If enabled this option is the right way to take the test, the
metal quickly enough of the loop is the same condition that happens
when the real exploration, and indeed around the metal loop on the
possibility that one. The ability to adapt to such a design appropriate
to the actual search. It also can be used to test more accurate than the
metal test loop was much closer and far away the metal's reaction, and
then the sound cut off the sound to the maximum range of the loop
measured.
Speed: (accelerate to sensing)
This setting is similar to feature in Motion
series GPX Minelab metal detectors intended, and actually determines the
speed of sense, or reaction with respect to the metal. The metal
detector did not function in normal programs, causes stability and
noise, as there is very good, and while exploring additional horns have
much lower. Lower values mean less speed and maximum stability of sense
and antisense noise and higher values mean more speed, which is less
stable and therefore there will be more noise. Selection of this
arrangement, the operator quickly and naturally explored to some extent,
depends a great loop, and to achieve greater stability However, if
needed, to sense the speed set on the lower level. Naturally, the lower
the need for slower speed loop, there is the possibility of losing goals
or less, there will be. In fact, set a lower value for the option, at
the same time can automatically; eliminating the possibility of more
small targets, and provides particles. It should
be mentioned, that
the system in an intelligent and targeted response if possible, is much
more powerful, it is not considered setting, and quickly, it will sense
metal. Naturally, the more stable, and maintain complete silence by this
arrangement, the degree of sensitivity of the device, the higher the
ratio, and the more he achieved
.
Iron Reject: (iron removal)
This setting is similar to the GPX Minelab
series , And by a complex formula of iron diagnosis, is done. OFF value
means the ability to remove iron is disabled, and the values of 1 to 30
also enable this feature, specify the degree of iron removal. Whatever
the number, the higher the setting, making removal more difficult and
can even lead to the removal of other metals. If this setting is
enabled, and the sense of iron is detected, the audio output will be cut
off, but the graphs and meters as well as number sense and resolution,
LCD screen will continue to show the objective sense. Working with this
parameter and calibration of the device, according to the conditions of
manufacture, and loop environment to explore, with important points that
will be described below. Set this parameter for each loop is different,
and should be in the right condition for the different loops and away
from metal annoying, tested and see what degree, the iron removal loops
do so for the same loop, set the same degree, Note that higher and put
this parameter can be the result of confusion, and the elimination of
non-ferrous materials as lead, after testing must be accurate and
consistent, this parameter set.
Backlight:
This setting adjusts the degree of light LCD
with digital, the value OFF means light off, and 10 is the maximum light
from the LCD screen. It should be noted that some types of LCD, with
different lighting systems, in which case you need to manipulate the
jumpers behind the LCD screen, so light does not work properly. In this
case, if the jumpers are not changed, the LCD should be used with other
brands. It should be mentioned, the LCD light on the circuit is designed
in such a way that, even in maximum light, power consumption will
increase, and so the idea was not to worry.
Contrast:
This setting is very similar to the previous
setting, but to control the amount of black on the LCD's contrast or
intended. The figure below highlight means of
posts, and more data
means more light is being written. Considering the differences between
LCD and also, with the point of view of the operator of the LCD screen
to position LCD on the box, and the structure of the device depends on
the operator would adjust so do, which is written in the best bit, the
eye be the operator.
Volume:
This set of audio output power circuit OFF
means that the sound is cut off completely, and 10 means maximum power
of sound. The plan also audio system, an incremental mode is intended
for voice, thus when metal comes closer loop, the sound is a little
stronger. For more efficient use of this mode, it is recommended to set
the sound volume on the lower levels. If the volume level is greater
than 7, the operation will not significantly affect the volume.
Tone:
This regulation is concerned, the sound
output mode to respond to sense the metal. The values 1, 2 and 3 each
monologue in the voice, or bass, or bass levels 4, 5 and 6 are two sound
and the amount of 7 three sound. But the 8 is as 3 sounds and depending
on the proximity to metal and power sense, works. This means that when a
weaker sense, the voice is falsetto, and the closer to the metal's
voice becomes stronger, where more bass, and finally when he is sensing
metal strongest, most bass the sound is produced. The sound is strong
goals help to identify more precisely the center. Ingredients that
prioritize voice and bass voices, more precise and safer for the sense
intended purpose has helped to true and false targets or random noise
should be recognized. The choice depends on the tastes of the operator's
voice, but it is recommended to use combinations of voices. While in
some cases 4, 5 and 6-speed voice, the voices modulate naturally depends
on the operating frequency metal detector, but the monologue, as well
as three 8 mode, there is no association between the frequency of the
metal detector and sound.
felezjoo pi metal detector
I'm going to introduce a very powerful metal detectors.
This metal detector is very simple and powerful .
And I think it is the best system that has ever been given for free to the public.
It is appropriate here to thank the designer (Mr. Hamid from iran).
Then I put the necessary files to build the metal detector and give explanations about it
The designer of this great system, to avoid unwanted effects caused by
the parts and hardware as well as to reduce the size of the system and
making it easy for most users, as well as those who have little
knowledge of electronics, small parts used .Instead, with an accurate
and professional programming, all features are included in the scheme
and applied digital.
The facilities that puts the plan the rows of systematic and powerful
global celebrity and gives many special features to the operator.
Features such as:
Sensitivity
Frequency regulation
Adjustable pulse width
delay
Contrast adjustment
Adjustable back light
Sound setting
Change the type of sound
iron reject
Target ID (The numerical separation of various metals)
Automatic Balance
Debug
Integ.W ( Set the interval integrator)
Adapting to the ground(Self Adjusting Threshold)
Set the speed sensing
And ...
